Suku Cadang Truk & Suku Cadang Undercarriage

melacak roller

TAB® menawarkan solusi track roller yang tahan lama untuk ekskavator dan buldoser. Sebagai seorang profesional produsen suku cadang undercarriagekami menyediakan komponen berkualitas OEM untuk alat berat.
Hubungi kami untuk pesanan massal atau solusi khusus.

1Halaman 1 / 1

Track Roller Berkinerja Tinggi untuk Mesin Tugas Berat

Produk track roller kami dirancang untuk ekskavator, buldoser, dan mesin konstruksi tugas berat. Track roller TAB® memberikan kekuatan yang unggul, mengurangi keausan pada track, dan menjaga kelancaran pengoperasian dalam kondisi yang berat. Komponen ini cocok untuk penggantian dan bagian undercarriage untuk dijual aplikasi, memastikan kinerja yang andal dan masa pakai undercarriage yang lebih lama.

Equipment Applications and Track Roller Functions

Track rollers carry loads between the machine's undercarriage frame and track assembly. Their dimensions, mounting arrangement, and contact profile must correspond to the intended machine configuration.

Track rollers are different from idlers and top rollers. Track rollers primarily support the machine's weight along the lower track assembly, while idlers guide the track and top rollers support the upper track chain. Choosing the correct component type is essential before comparing individual part numbers.

TAB® product references include track rollers for selected Komatsu machines, including the D80. Buyers should confirm the exact equipment model, OEM reference, and configuration before ordering.

Core Materials and Wear Requirements

Track rollers must withstand repeated loading and contact with the track system. Their material and surface properties influence wear resistance, structural integrity, and performance under impact.

Selected TAB® product specifications list steel grades including 40Mn2, 35MnB, 50Mn2, and 40Cr. The appropriate material depends on the specific part and should be verified against its technical documentation.

Key selection considerations include:

  • Material grade and consistency
  • Surface hardness and wear resistance
  • Core strength and toughness under impact
  • Dimensional accuracy of the roller profile and mounting interfaces
  • Sealing and lubrication arrangements where applicable
  • Surface protection and storage requirements

Material choice should be assessed together with the component design and operating conditions. A harder contact surface alone does not establish suitability if other mechanical requirements are not met.

Manufacturing Processes and Quality Control

Depending on the design, track roller manufacturing may involve steel processing, precision machining, heat treatment, assembly, sealing, and dimensional inspection.

Where heat treatment is specified, the process must suit the material and intended component requirements. The balance between surface wear resistance and the mechanical properties of the underlying structure is an important consideration for load-bearing parts.

Dimensional inspection helps confirm that the roller profile and mounting interfaces match the required configuration. For sealed assemblies, the relevant sealing and lubrication arrangements should also be verified.

When evaluating a product, request confirmation of the applicable material grade, heat-treatment requirements, dimensions, inspection scope, and acceptance criteria. These details should be confirmed for the selected model instead of generalized across the full range.

How to Choose the Right Track Roller

Use the following checklist before placing an order:

  1. Equipment identification: Provide the machine manufacturer, exact model, and serial number where available.
  2. OEM reference: Include the original track roller part number.
  3. Dimensions: Provide the relevant overall dimensions, mounting interfaces, and profile details if the reference is unavailable.
  4. Component position: Confirm the required roller type and installation location.
  5. Operating conditions: Describe the ground conditions, workload, and expected service requirements.
  6. Quantity: State the number of rollers required for each machine or part reference.
  7. Technical requirements: Identify any specified material, heat-treatment, or sealing requirements.

For replacements involving multiple rollers, confirm whether all requested items share the same part reference and configuration. Do not assume that visually similar rollers are interchangeable across different machine models.

Bulk Purchasing and OEM Cooperation

TAB® supports bulk inquiries from parts distributors, wholesalers, equipment maintenance companies, and fleet operators.

For multi-model sourcing, submit an itemized list that identifies each equipment model, part number, and required quantity. For repeat orders, provide expected demand and reorder frequency to support supply planning.

OEM or customized requirements may involve drawings, samples, material specifications, and a review of production feasibility. Packaging, labeling, minimum order quantities, lead times, and shipping arrangements should be confirmed for the specific order.

Mengapa Memilih TAB® dari Tianzhong Machinery

TAB®, bagian dari Tianzhong Machinery, memiliki lebih dari 20 tahun pengalaman dalam pembuatan komponen undercarriage berkualitas tinggi. Sebagai yang tepercaya pemasok suku cadang undercarriagekami menggabungkan teknik presisi, bahan canggih, dan kontrol kualitas yang ketat untuk menghasilkan track roller yang memenuhi standar OEM. Produk kami banyak digunakan oleh distributor, operator armada, dan klien OEM di seluruh dunia.

Pelajari Lebih Lanjut Tentang Komponen Undercarriage TAB®

Jelajahi rangkaian lengkap produk undercarriage TAB® kami:

TAB® memastikan alat berat Anda beroperasi secara efisien, aman, dan dengan waktu henti yang minimal.

Information Required for a Track Roller Quotation

To help our team review the correct component, please provide:

  • Equipment brand and exact model
  • OEM part number or existing reference
  • Machine serial number or production version, where available
  • Drawings, dimensions, or clear product photographs
  • Required material and technical specifications, if applicable
  • Quantity per part number
  • Packaging, labeling, or branding requirements
  • Destination country and requested shipping terms

If you are purchasing for several machines, attach a consolidated parts list with separate lines for each model and reference. This makes it easier to review compatibility and prepare a product-specific quotation.

Tinggalkan Pesan Anda