-
TAB® KOMATSU Запчасть ходовой части Idler PC300
-
TAB® KOMATSU Запчасть ходовой части Idler PC60
-
TAB® KOMATSU Запчасть ходовой части Idler PC40
-
TAB® HITACHI Запчасть ходовой части Idler ZX450
-
TAB® HITACHI Запчасть ходовой части Idler EX300
-
TAB® HITACHI Запчасть ходовой части Idler EX35
Ролики премиум-класса для тяжелой техники
Our idler roller products are engineered to withstand extreme loads, abrasive conditions, and long operational hours. Designed for bulldozers and excavators, TAB® idler rollers reduce track tension, ensure smooth movement, and extend undercarriage life. They are ideal for both replacements and деталь ходовой части для продажи обеспечивая производительность и надежность OEM-качества.
Equipment Applications and Idler Functions
An idler is a guiding component within a tracked machine's undercarriage. Its geometry and mounting arrangement must match the track system to maintain correct engagement and alignment.
TAB® product listings include references for selected Komatsu and Hitachi machines, with additional product information available for specific Caterpillar applications. These references provide a starting point for identification, but the machine brand alone does not establish fitment.
When sourcing an idler, provide the equipment manufacturer, model, serial number where available, and OEM number. If the original number is unknown, supply photographs and relevant dimensions to help confirm the required design.
Core Materials and Construction
Idler rollers are generally built around steel structures designed to withstand mechanical loads, impact, and repeated contact with the track system. Material properties and surface treatment requirements depend on the component design and operating conditions.
For selected TAB® undercarriage products, published specifications include steel grades such as 40Mn2, 35MnB, 50Mn2, and 40Cr. The applicable material should be confirmed for the particular idler reference.
Other design considerations include:
- Structural strength under the intended operating load
- Wear resistance at track-contact surfaces
- Dimensional accuracy at mounting and mating interfaces
- Sealing arrangements and lubrication for applicable designs
- Surface protection and packaging during storage and transport
The required configuration depends on the machine and its operating environment. Material or construction changes should be reviewed against the relevant technical specification.
Manufacturing and Quality Considerations
Depending on the idler design, manufacturing may involve steel processing, precision machining, heat treatment, assembly, sealing, and dimensional inspection.
Machined profiles and mounting interfaces must correspond to the specified undercarriage geometry. For designs with internal bearing and sealing arrangements, assembly quality and contamination control are also relevant to service life.
Buyers evaluating a replacement should confirm the material grade, applicable heat-treatment requirements, dimensional tolerances, sealing configuration, and inspection criteria where specified. These details should be established for the requested model rather than assumed to be identical across the product range.
How to Select the Right Idler
A suitable idler must match both the machine and its track configuration. Before ordering, verify:
- Equipment manufacturer and exact model
- Serial number or production version where available
- OEM part number or existing idler reference
- Overall dimensions, shaft or mounting interfaces, and track-contact geometry
- Required quantity and replacement scope
- Operating environment, including abrasive ground conditions and workload
- Any specified material, hardness, or sealing requirements
If the reference number is unavailable, provide clear photos from multiple angles and measurements of the key interfaces. A drawing or physical sample may be needed for further identification.
Do not select an idler solely by appearance or approximate dimensions. A mismatch can affect track alignment and compatibility with related undercarriage components.
Bulk Idler Orders and OEM Requirements
TAB® supports bulk purchasing inquiries from equipment parts distributors, wholesalers, repair networks, and fleet maintenance providers.
For multi-model orders, provide a separate part reference and quantity for each machine application. This helps distinguish similar-looking components that may use different dimensions or mounting configurations.
Recurring supply programs can be reviewed according to forecast quantities, order frequency, packaging, labeling, and shipment requirements. OEM or customized requests may require drawings, samples, technical specifications, and confirmation of manufacturing feasibility.
Minimum order quantities and delivery schedules vary by product. Confirm the applicable terms in the quotation before placing an order.
Почему стоит выбрать TAB® и Tianzhong Machinery
TAB® обеспечен Машины Тяньчжунведущий производитель с более чем 20-летним опытом работы в области компонентов тяжелого оборудования. Как профессиональный поставщик деталей ходовой частиМы используем передовые материалы и высокоточную обработку для создания долговечных и высокопроизводительных ходовых частей. Нашей продукции доверяют OEM-производители, дистрибьюторы и операторы автопарков по всему миру.
Узнайте больше о компонентах ходовой части TAB®
Изучите наш обширный ассортимент деталей ходовой части TAB®:
TAB® обеспечивает эффективную, надежную работу тяжелой техники с минимальным временем простоя.
Information Needed for an Idler Quotation
Please provide the following where available:
- Equipment make and exact model
- OEM part number or existing component reference
- Machine serial number or production version
- Idler dimensions, drawings, or photographs
- Material or technical requirements, if specified
- Quantity per part number
- Packaging and labeling requirements
- Destination country and requested shipping terms
For a fleet or distributor sourcing program, an itemized parts list is recommended. Our team can review the references and identify missing information before quotation.








